Mid Landing Channels

Reference Parameters

• MiterCutOffset

Expressions for Default User Parameters

• B_L: MidLandingDepth

• G_OFFSET_START

  • if XY plane is at front end: 0

  • if XY plane is at back end: MiterCutOffset

• G_OFFSET_END

  • if XY plane is at front end: MiterCutOffset

  • if XY plane is at back end: 0

User-Defined Parameters

• StairAngleFromFloor - defined by PA

• MidLandingDepth - set by PA

• LegHoleDiameter - arbitrary value 11/16"

• LegHoleSpacing - arbitrary value 2.25

• LegHoleFromFront - arbitrary expression = MidLandingDepth/2

• LegHoleFromTop - arbitrary expression = TopChannelHoleFromTop + 2.25 in

• Channel Size - for changing size, set from PA

• TreadHoleDiameter - arbitrary value 0.46

• MidLandingTreadHoleFromTop - default value 2, set from TA

• MidLandingTreadHoleFromFront - default value 2, set from TA

• MidLandingTreadHoleQTY - default value 3, set from TA

• MidLandingTreadHoleSpacing - default value 15, set from TA

• TreadRise - set from PA

• TreadRun - set from PA

Mid Plane - the center of the flanges (for constraint)

• Define as midplane between Bottom Plane and Top Plane

Landing Start Plane - offset from XY Plane

• XY Plane at Back End: offset value (MidLandingDepth )

• XY Plane at Front End: offset value 0

Miter Cut (through all) (both front and back)

Tread Hole (Diameter = TreadHoleDiameter)

Tread Hole Pattern (QTY = TopLandingTreadHoleQTY; Spacing = TopLandingTreadHoleSpacing)

Leg Hole (Diameter = LegHoleDiameter)